| |
REFERENCE
|
On basis of long termed experience I suggest cooperate in district of automatization technology with orientation on systems SIMATIC ... |
In 15 years of work in district of automatization technology with orientation on higher mentioned systems was realized many program analisis on systems Simatic S5 and S7 in reassume on next
case:
- Prepare of new programmatic algorythm for control system and his realization
- modification of old algorythm control with requestion of change or completation of functions
- directly diagnostic of disorder or create diagnostic algorythm for find cause
This works were realized on other levels od difficluty in dependece on concrete application of control system:
- binary logic of control
- execute of analogic signals
- execute of impulses, controling of position, pulse-wide modulation (PWM)
- central and decentral configuration of systems
- application of decentral periphers (PROFIBUS, AS-I, ProfiNET)
- mathematic calculations, statistic
- regulation
- visualization (TD/OP/TP/PC)
- communication and transfer of datas (..., PPI, MPI, PROFIBUS, AS-I, RK512,
3964R, ASCII, ...)
|
|
Selective view of realized order's
|
S7300, CPU315-2PN/DP, STEP7, WinCC Flexible, Micromaster,
Sinamics, S7-Ethernet, remote servis
Delivery SW for PLC and HMI for production machine "STENTER
& INFRAZONE" (textil machine)
|
 
  
|
S7-400, CPU414-2DP, MP277, STEP7, WinCC Flexible
Delivery of hardware and software management system for material handling
equipment using crane. The average speed of handling t <10s on the
trajectory of movement of 10 meters, including starting and stopping (1
lift 4 m in the y axis, 1 travel 2 meters in the X axis, 1 fall 4 meters
in the y axis).
|
  
  
|
S7-300, CPU315-2DP, CPU312, FM350-1, CP342, PRB (Power Rail Booster), STEP7,
WinCC Flexible
Application with using PRB (power booster for net DP-
Profibus with bus transfer), CPU315- 2DP master + 2xCPU312/CP342 slave,
main longitude 250m + secondary longitude 30m).
|
|
  
 
|
S7-300, CPU314 STEP7, MP277 WinCC Flexible
Control system for spiral press for
plastics (extruder) and pressing form.
|
|
 
|
S7-200, CPU214 STEP7 MicroWin, OP73 WinCC Flexible
Control system for top-fed stove elevator.
|
 |
S7-300, CPU315-2DP STEP7, TP177B WinCC Flexible
Control systems for assemble lines of valves. Rate assembling 250ms/part.
|
|
 
 
|
S7-300, CPU314
Control system for shaping machine continual production from stump
material.
|
 |
S7-200, CPU-216, TD200
Control system for programming unit (contactless
scanning of rotation angle) for car idustry.
|
S7-300, CPU-315-2DP, OP17 (na přání), HMI ProTool Pro/CS
Control system for magnetize station of
contactless position sensor and for ultrasonic welding station for car
industry.
|
 |
S7-300, CPU-314, STEP7, AS-i, OP177B, HMI WinCC Flexible
Control system for quality testing machine of screw.
|
|
  
|
S7-200, CPU-224, STEP7 MicroWin, TP177, HMI WinCC Flexible
Control system for central strewn and pneumatic transport of
granulate.
|
 
 |
TP270, HMI WinCC Flexible
Change of visualization from WF470 to TP270 for tracked traverser
filling of drying chambers (displayed only part of screens)
|
|
 
|
S7-300, CPU315-2DP, STEP 7, OP17, ProTool Pro
Realization of control system for pressure test lines S7 - 300 +
OP17
|
|
S7-300, CPU315-2DP, STEP 7, OP270, ProTool Pro
Checkout and putting into service of second production line on
production of glass goods for corporation STEKLOVOLOKNO (Belorussia)
|
 
|
S7-300, CPU314, STEP 7
GAB transportation line, 8 belt conveyers, concurrence to
manipulator produce, S7 - 300.
|
S7-400, CPU 416-2DP, STEP 7, TP370, HMI WinCC Flexible, POSMO A
Work out of project (change from S5 system to S7, change of motors
and change of control from Berger- Lahr to Posmo A) for company MANNESMANN
- ROBUR (Holland).
|
 
|
S7-200, MicroWin, OP77, WinCC flexible
Realization of admeasurement and drive control of saw for stone
parting S7 - 200 + OP77.
|
 
|
S7-300, CPU 315-2DP, STEP 7, OP17-II
Change of control system for robotized workplace with using S7 - 300
+ PP17II
|
|
S7-300, CPU315-2DP, STEP 7, OP270, ProTool Pro
Checkout and putting into service of first production line on
production of glass goods for corporation STEKLOVOLOKNO (Belorussia).
|
|
S7-300, CPU 317-2DP, STEP 7, TP370, TP170, ProTool Pro
Delivery of control system for carpet production line for company
BETAP (Holland).
|
 
 
 
 
 
|
TP170B, ProTool Pro
Panel change from LAUER to TP170B
|
|
S7-300, CPU 313C, STEP 7, OP7, ProTool Pro
Dosage control for production of four-element granulate mixtures
|
TP270, ProTool Pro
Visualization of milk pasteurization and ultrafiltration TP270
|
 
|
OP17, ProTool Pro
Change of panels from VT80 to OP17
|
S7-300, CPU 314, STEP 7
Packing machine for tea box
|
S7-300, CPU 314, STEP 7
Non - stop spray application of isolation on towed away metallic
core
|
S7-200, CPU 214, MicroWin
Control system for builder's lift
|
S7-200, CPU 212, MicroWin
Checking and outage of wrong stuffed glasses in food industry at
speed of 60 - 120 glasses per second
|
S7-400, CPU 412, STEP S7, OP17, ProTool Pro
Control system for cannon pressure perforating
|
S7-200, CPU 214, MicroWin
Twist control of spin round and towed away rotating reel
|
S7-300, CPU 314, STEP 7
Palletization of small boxes with fleeting choice and composition
|
S7-200, CPU 214, MicroWin, PC, VBasic
Motor test, on - line PC processing, print of protocol
|
S7-300, CPU 313-2PtP, STEP 7, PC, VBasic
Manipulation fuel collator
|
|
S7-200, CPU 214, MicroWin
Pneumatic transport of powder material
|
S7-200, CPU 214, MicroWin
Packing machine to the shrink - wrap
|
S5-115, CPU 943, STEP 5
Filling station of cooling liquid for engine
|
S5-100, CPU 103, STEP 5
Single-purpose machine for cutting of commutators for electric motor
|
S7-200, CPU 214, MicroWin
Filling line of liquid for public health
|
|
